What this product is for

This magnetic LED driver converts 120V AC input power to 24V DC constant-voltage output for compatible LED strip lighting and other low-voltage lighting loads that require a dimmable magnetic driver.

Use for

Use for 24V DC LED strip runs, cove lighting, undercabinet lighting, accent lighting, and other low-voltage installations where a magnetic dimmable driver is specified. It is commonly selected where compatibility with magnetic low-voltage or phase-dimming controls is required.

Avoid for

Avoid using this driver with fixtures or tape light that require constant-current output, non-compatible dimming protocols, or a different output voltage. Do not use where the connected load exceeds the driver rating.

Best for

Best for electricians and lighting contractors needing a 24V DC, 200W hardwired driver for larger LED strip loads or longer runs split across suitable feeds. For LED strip layouts, a typical rule of thumb is to leave headroom rather than loading a driver to 100% continuously. Actual performance depends on installation conditions, ambient temperature, layout, and local electrical code.

Installed in

Typically installed in residential and light commercial millwork, display lighting, coves, valances, and service-accessible locations where a hardwired magnetic driver is appropriate.

Why this product exists

24V DC lighting systems need a compatible constant-voltage power supply. A magnetic dimmable driver is used when the lighting design calls for low-voltage dimming compatibility and a robust hardwired power solution.

Compared with similar products

Compared with non-dimmable drivers, this model is intended for dimming applications. Compared with smaller 24V drivers, the 200W capacity suits higher total connected wattage. Compared with electronic drivers, magnetic drivers are often chosen when the dimming system specifically calls for magnetic low-voltage compatibility.

Specifications

• Manufacturer part number: EM200S24DC
• Brand: Axite Lighting
• Product type: Magnetic LED driver
• Input voltage: 120V AC
• Output voltage: 24V DC
• Output type: Constant voltage
• Maximum power: 200W
• Dimming: Dimmable, magnetic/phase-dimming application
• Application: Indoor/outdoor low-voltage lighting applications where permitted by product listing and installation method

Typical buying guidance: 24V systems are commonly preferred for longer LED strip runs to help reduce voltage drop compared with 12V systems. Actual run length and performance depend on wire size, total load, feed points, and installation conditions.