What this product is for

This 150W magnetic LED driver converts 120V AC input to 24V DC constant-voltage output for compatible 24V LED strip lighting and other low-voltage LED loads. It is intended for installations that require phase-cut dimming with a magnetic-style driver.

Use for

• 24V DC LED strip lighting
• Cove, undercabinet, display, and accent lighting
• Indoor or outdoor low-voltage lighting where a NEMA 3R enclosure is suitable
• Projects using compatible MLV, ELV, or CL dimmers

Avoid for

• Constant-current LED fixtures or modules
• 12V lighting systems
• Applications exceeding 150W total connected load
• Installations requiring a different dimming protocol unless compatibility is confirmed

Best for

Best for electricians and lighting contractors specifying a 24V constant-voltage driver with magnetic phase dimming, steel enclosure, and field wiring access for architectural, residential, and light commercial LED strip applications.

Installed in

Typically installed in millwork lighting, coves, soffits, display lighting, undercabinet runs, and other low-voltage LED strip systems. The enclosure includes wiring compartment knockouts for hardwired installation.

Why this product exists

This driver is used when the LED load requires 24V DC constant voltage and the control scheme is based on compatible phase-cut dimming at the 120V side. Compared with plug-in power supplies, it is better suited to permanently installed lighting systems with higher wattage demand.

Typical guidance: many contractors size LED drivers with headroom rather than loading to the full nameplate wattage. A common rule of thumb is to keep continuous LED load to approximately 80% of capacity where practical, which would be about 120W on a 150W driver. Actual performance depends on installation conditions, dimmer compatibility, wiring layout, and local electrical code.

Compared with similar products

Compared with non-dimmable constant-voltage power supplies, this model supports phase dimming with compatible controls. Compared with electronic drivers, a magnetic driver may be selected where the project specifically calls for magnetic low-voltage dimming behaviour or matching existing system design.

Specifications

• Manufacturer part number: EM150S24DC
• Brand: Axite Lighting
• Product type: Magnetic dimmable LED driver
• Input voltage: 120V AC, 60Hz
• Output voltage: 24V DC constant voltage
• Maximum wattage: 150W
• Maximum output current: 6.2A
• Dimming: Phase-cut, compatible with MLV, ELV, and CL dimmers
• Enclosure: Black powder-coated steel
• Enclosure rating: NEMA 3R
• Dimensions: 8 in x 4.15 in x 3.41 in (approximately 203 x 105 x 87 mm)
• Input leads: 18 AWG, 600V
• Output leads: 12 AWG, 300V
• Lead temperature rating: 105 degC
• Temperature class: B (130 degC)
• Primary protection: Manual-reset thermal breaker, 2A
• Secondary protection: Manual-reset magnetic breaker, 10A
• Typical efficiency: 88%