What this product is for

This 96W electronic LED driver converts 100-277V AC input to 24V DC constant-voltage output for compatible LED strip lighting and other 24V low-voltage luminaires. It is intended for installations that need dimming flexibility and a Class 2 power supply.

Use for

Use for 24V LED tape light, undercabinet lighting, cove lighting, accent lighting, millwork lighting, and architectural low-voltage lighting where a dimmable 24V DC driver is required. Typical sizing guidance: a 96W, 24V driver provides approximately 4A maximum output, so it is commonly used where the connected 24V load stays below the driver rating with appropriate design margin.

Avoid for

Avoid for constant-current LED fixtures, 12V systems, or loads that exceed 96W total. Do not treat estimated load planning as a guaranteed design value. Actual performance depends on installation conditions, wiring layout, dimmer compatibility, voltage drop, and local electrical code.

Best for

Best for electricians and lighting contractors who need one driver that can work with multiple dimming methods, including forward phase, reverse phase, and 0-10V style control options. Suitable where a compact hardwired driver is preferred for residential or light commercial LED strip applications.

Installed in

Typically installed in millwork, display lighting, soffits, coves, undercabinet runs, feature lighting, and other indoor or outdoor low-voltage lighting systems where the enclosure rating and installation method are appropriate. The enclosure is commonly described as black powder-coated steel with conduit knockout provision sized for 3/8 in fittings.

Why this product exists

LED strip systems require stable low-voltage DC power and often need compatibility with different dimming controls already specified on the job. This driver exists to provide 24V DC output with multi-protocol dimming support from a universal line-voltage input range.

Compared with similar products

Compared with non-dimmable 24V power supplies, this model is intended for projects where dimming control is required. Compared with 12V drivers, it is matched to 24V lighting systems, which are commonly preferred for longer LED strip runs because they can help reduce current and voltage-drop concerns. As a rule of thumb, confirm total fixture wattage and allow headroom rather than loading the driver to its absolute maximum.

Specifications

• Type: Electronic constant-voltage LED driver
• Output power: 96W maximum
• Output voltage: 24V DC
• Maximum output current: approximately 4A
• Input voltage: 100-277V AC, 50/60 Hz
• Dimming: 5-in-1, including TRIAC forward phase, ELV reverse phase, 0-10V, 1-10V, resistor, and PWM references across source listings
• Class: Class 2
• Certifications: UL and CSA / certified to applicable CSA standard per source listings
• Enclosure: Black powder-coated steel
• Connection details: Hardwire leads with 3/8 in conduit knockout provision
• Typical application: 24V LED strip and low-voltage lighting systems