What this product is for

This 24V DC magnetic LED driver is used to power constant-voltage LED strip lighting and other compatible 24V DC low-voltage lighting loads. It is intended for installations that require magnetic dimming and a hardwired power supply in a metal enclosure.

Use for

Use for 24V DC LED tape light, undercabinet lighting, cove lighting, accent lighting, and other constant-voltage LED systems within the driver rating. It is suitable for indoor or outdoor locations where a NEMA 3R enclosure is appropriate.

Avoid for

Avoid using this driver with constant-current LED products, non-compatible dimming controls, or loads that exceed the rated output. Do not assume all wall dimmers will perform the same; magnetic low-voltage dimmer compatibility should be confirmed before ordering.

Best for

Best for electricians and lighting contractors specifying 24V DC dimmable power for longer LED strip runs, architectural lighting, and projects where a magnetic driver is preferred. A typical rule of thumb is to size LED drivers with some headroom rather than loading them to the limit. Actual performance depends on installation conditions, connected load, ventilation, and local electrical code.

Installed in

Commonly installed in millwork, display lighting, residential accent lighting, hospitality lighting, and light commercial LED strip applications. The enclosure includes knockouts for hardwired installation and is commonly mounted in accessible service locations.

Why this product exists

LED strip systems often require a 24V DC constant-voltage power source that can work with magnetic low-voltage dimming controls. This driver provides that conversion from 120V AC input to 24V DC output in a compact enclosed format.

Compared with similar products

Compared with non-dimmable drivers, this model is intended for dimming applications. Compared with electronic drivers, a magnetic driver is commonly selected where magnetic low-voltage dimmer compatibility is required. Compared with smaller 20W, 40W, or 60W models in the same family, this 100W class unit is better suited to larger 24V DC lighting loads.

Specifications

• Manufacturer part number: ML100S24DC
• Brand: Axite Lighting
• Product type: Magnetic dimmable LED driver
• Input: 120V AC, 60 Hz
• Output: 24V DC constant voltage
• Rated wattage: 100W class
• Published max load from supporting spec sources: 96W max
• Max output current: 4A
• Dimming: Magnetic low-voltage dimming; compatible dimmer selection required
• Enclosure: NEMA 3R, black powder-coated steel
• Location rating: Indoor/outdoor use where NEMA 3R is suitable
• Dimensions: 8.13 in x 3.93 in x 1.59 in (approximately 206 x 100 x 40 mm)
• Weight: 4.3 lb (approximately 2.0 kg)
• Knockouts: 3/8 in trade size knockouts
• Warranty: 5 years
• Typical application note: For 24V LED strip, driver sizing is commonly based on connected wattage plus headroom. Actual loading and dimming results depend on the fixture, controls, wire run, and installation conditions.