What this product is for

This indoor LED ribbon is a 24V constant-voltage strip light for interior accent and task lighting where a clean 4100K neutral white appearance and improved colour rendering are required. It is supplied as a 16 ft (4.9 m) roll and rated at 4.5W per foot.

Use for

Use for undercabinet lighting, cove lighting, millwork, shelving, display cases, toe-kick lighting, and other indoor linear lighting applications where flexible strip lighting is needed. The 91 CRI rating makes it a better fit where colour appearance matters more than basic accent lighting.

Avoid for

Avoid for wet locations, direct exterior exposure, or installations requiring an outdoor or wet-location rated strip. Also avoid using it with the wrong driver voltage; this ribbon is intended for 24V systems.

Best for

Best for electricians, cabinet installers, and lighting contractors specifying a higher-output indoor ribbon for neutral white architectural lighting. It suits projects that need more light than 1.5W/ft or 3W/ft strip options in the same product family.

Installed in

Typically installed in kitchens, retail displays, reception areas, shelving, coves, valances, and custom millwork. For a cleaner finish and heat management, strip lighting is commonly paired with an aluminium channel where the installation allows.

Why this product exists

This product fills the need for a higher-output indoor LED ribbon in Axite's 24V strip lighting range, offering 4100K light and 91 CRI in a flexible 16 ft roll. Compared with lower wattage strip options, it is intended where stronger illumination or tighter spacing to the lit surface is needed.

Compared with similar products

Within the Axite indoor ribbon family, EV1 models are listed at 1.5W/ft and EV3 models at 3W/ft, while this EV5 version is listed at 4.5W/ft with 91 CRI. As a rule of thumb, LED strip around 3W/ft is commonly used for task lighting, while 5W/ft and up is more often selected where the strip contributes more substantially to primary illumination. Actual performance depends on mounting height, surface reflectance, lensing, spacing, and local electrical code.

Specifications

• Brand: Axite Lighting
• Manufacturer part number: EV5-IN-16-24V-4100K
• Product type: Indoor LED ribbon / LED strip light
• Length: 16 ft (4.9 m) roll
• Input voltage: 24V DC
• Power: 4.5W/ft
• Approximate total wattage per roll: 72W
• Colour temperature: 4100K
• CRI: 91
• Application: Indoor use
• Product family: Axite Indoor LED Ribbon EV5 series

Typical driver sizing guidance: allow approximately 25% headroom when selecting a driver, so a 72W strip load would commonly be paired with a driver sized above the connected load. Actual loading depends on run length, controls, and installation conditions.