What this product is for

This indoor LED ribbon tape light is used for low-wattage accent lighting where warm 2700K light and good colour rendering are important. It is supplied in a 16 ft (4.9 m) roll and operates on 24V DC.

Use for

• Under-cabinet lighting
• Cove and valance lighting
• Shelf and display lighting
• Toe-kick lighting
• Residential and light commercial accent applications

Avoid for

• Outdoor or wet-location installations unless used in a rated enclosure or system specifically approved for that use
• Primary room lighting where higher lumen output is required
• Direct connection to line voltage without a compatible 24V DC driver

Best for

Best for electricians and lighting installers who need a warm white indoor ribbon for short accent runs, millwork, cabinetry, and architectural details where 90 CRI is preferred over basic decorative strip lighting.

Installed in

• Kitchens and millwork
• Display cases and shelving
• Residential coves and niches
• Retail feature lighting
• Light commercial interiors

Why this product exists

This model provides a lower watt-density ribbon option for indoor accent lighting. As a rule of thumb, 1.5W/ft LED strip is commonly used for accent and decorative lighting rather than task or primary lighting. Actual light levels depend on mounting height, surface reflectance, channel/lens selection, and driver setup.

Compared with similar products

Compared with higher-output indoor ribbon such as 3W/ft products, this 1.5W/ft version is better suited to subtle accent effects with lower power draw. The 24V design is commonly preferred for longer runs than 12V systems because it can help reduce voltage drop in typical layouts, but actual run performance depends on feed location, conductor size, and installation conditions.

Specifications

• Brand: Axite Lighting
• Manufacturer part number: EV1-IN-16-24V-2700
• Product type: Indoor LED ribbon / tape light
• Length: 16 ft (4.9 m)
• Input voltage: 24V DC
• Power: 1.5W/ft
• Colour temperature: 2700K
• CRI: 90
• Application: Indoor
• Typical use: Accent lighting

Estimated buying guidance only: 1.5W/ft strip is typically selected for accent lighting, while higher watt densities are more commonly used for task lighting. Actual performance depends on installation conditions, mounting method, driver selection, and local electrical code.